INTEGRATION GUIDE FOR THE RETINOMAX K PLUS 3

RETINOMAX K PLUS 3 CONFIGURATION

The operator’s manual for the K Plus 3 can be downloaded here. See page 74

RS232C REF:	ALL
RS232C KER:	ALL
RS232C Pupil:	ALL
Baud Rate:	9600
Data Bits:	8
Parity:	None
Stop Bits:	Two

CRYSTAL MACHINE UTILITY CONFIGURATION

Set up the Crystal PM Machine Utility using the following instructions: Crystal PM Machine Integration Utility Setup

Data Speed:	9600
Data Bits:	8
Parity:	None
Stop Bits:	Two
Flow Control:	None
Output:	Text (.txt) output

CRYSTAL CONFIGURATION

Add the Machine:

1. In Crystal, go to the Records tab

2. In Records, navigate to EHR Settings à Import Machines à Select an open Machine Slot

3. A window will open with a list a of machines, click on “Browse for available machines” at the bottom

4. Choose the machine labeled “Retinomax K-plus3”

5. Browse to the .txt output location (C:/Program Files (x86)/CrystalPM/mach/mach1/mach1.txt)

6. Click open, then leave the Records tab in Crystal and then come back to it (Click on Tasks tab then click back onto records tab.)

Create the button in records:

1. In Records, navigate to EHR Settings à Edit Medical Record Templates

2. At the bottom of the Edit Fields Window click on “Add New Field”

3. Make the field type to be a button

4. Assign the fields in your template to the corresponding fields from the .txt file below:

5. Add field to template and Save Changes

MACHINE BUTTON MAPPING

ID     Data                            

1        OD Sph

2        OD Cyl

3        OD Axis

4        OS Sph

5        OS Cyl

6        OS Axis

7        OD K1 mm

8        OD K1 diopter

9        OD K1 Axis

10       OD K2 mm

11       OD K2 diopter

12       OD K2 Axis

13      

14      

15       OS K1 mm

16       OS K1 diopter

17       OS K1 Axis

18       OS K2 mm

19       OS K2 diopter

20       OS K2 Axis

21      

22